09/11/2026

Bobcat T550 Tracks: Size, Fit and Undercarriage Parts

The Bobcat T550 is listed with one track size, 400 x 86 x 49B (400 mm / 15.7 in wide, 86 mm pitch, 49 links), in a C-lug or Z-lug tread for the solid-mount undercarriage. This guide covers how to confirm the fit, the signs of wear and the T550 front and rear idlers and bottom rollers to check.

Bobcat T550 Tracks: Size, Fit and Undercarriage Parts

Bobcat T550 Tracks: Size, Fit and Undercarriage Parts

Machine guideBobcat T5506 min read

Ordering new tracks for a Bobcat T550 starts with the size, and our catalog lists one track size for this machine. This guide gives the Bobcat T550 track size, the two tread patterns it comes in, how to confirm the fit, which undercarriage each part is listed for, the signs that tracks are worn and the T550 idlers and bottom rollers worth checking while the tracks are off.

The short answer

  • The Bobcat T550 track is listed as 400 x 86 x 49B: 400 mm (15.7 in) wide, 86 mm pitch, 49 links.
  • It comes with a C-lug or Z-lug tread, is listed for the solid-mount undercarriage and is sold per track.
  • At a track change, check the front and rear idlers, the 8 bottom rollers and the drive sprockets. We do not currently list a T550 sprocket online, so ask the team.

Bobcat T550 track size

Our catalog lists a single track size for the Bobcat T550 with the solid-mount undercarriage. Width, pitch and link count are fixed, so the only choice to make is the tread.

Track size Width Pitch Links Tread
400 x 86 x 49B 400 mm (15.7 in) 86 mm 49 C-lug
400 x 86 x 49B 400 mm (15.7 in) 86 mm 49 Z-lug

Source: Excavator Parts Direct catalog, November 2026. Solid-mount undercarriage. Sold as a single track (price is per track).

Read the size as width x pitch x links. A 400 x 86 x 49B track is 400 mm wide, has 86 mm between link centers and has 49 links. Both treads share these dimensions, so either one matches the size on the machine. If your old track shows a different size, check with us before you order.

Bobcat T550 rubber track, 400 x 86 x 49B, C-lug tread
Bobcat T550 rubber track, 400 x 86 x 49B, Z-lug tread
Bobcat T550 track, 400 x 86 x 49B. Left: C-lug tread. Right: Z-lug tread.

How to measure a T550 track

If the size is still readable on the side of your old track, use it. If it has worn away, take three measurements:

1

Width

Measure across the track from edge to edge. A T550 track should measure 400 mm (15.7 in).

2

Pitch

Measure from the center of one link to the center of the next. The T550 track has an 86 mm pitch. Measure over several links and divide, which gives a truer figure than a single gap.

3

Links

Count the drive lugs around the inside of the track. The T550 track has 49. Mark your starting lug with chalk so you do not count one twice.

If your numbers match 400, 86 and 49, you have the right size. Our guide to measuring rubber tracks shows each step with diagrams.

Four checks before you order T550 tracks

1

Match the size

Compare the size on the old track, or your measurements, with the table above. If the width is not 400 mm, the pitch is not 86 mm or the link count is not 49, stop and check before you order.

2

Confirm the undercarriage

Our T550 track and idler are listed for the solid-mount undercarriage. Our T550 bottom roller listing does not name an undercarriage. If you are not sure which undercarriage your machine has, contact us with the machine details and serial number and we will check.

3

Choose the tread

The T550 track is listed with a C-lug or Z-lug tread. The right one depends on the ground the machine works on most and the jobs it does. Fit two tracks of the same tread so both sides grip and wear evenly.

4

Look underneath first

Before the new tracks go on, inspect the sprockets, idlers and bottom rollers. New tracks on a worn undercarriage wear out sooner.

Our advice

A size that is checked, not guessed, is the quickest way back to work. If anything does not match, talk to the team before you order, so you maximize machine uptime and avoid a return.

Signs your T550 tracks are worn

These are the checks we recommend on any tracked machine, and they apply to the T550.

Tension will not hold

If the track keeps going slack after you adjust it, do not assume the track is the cause. A track adjuster with failed piston seals cannot hold tension, and worn sprockets can add to the problem. Here is how to check rubber track tension, and our guide to the track adjuster explains how it works. The correct tension figure for the T550 is in your machine’s operator’s manual.

The track slips or jumps on the sprocket

When sprocket teeth wear sharp, they stop holding the track cleanly. The track can slip or jump through the sprocket, and the shock load travels into the final drive. If you see or hear this happen, stop and inspect the sprockets before you carry on.

Cuts, missing lugs or exposed cords

Deep cuts, missing lugs and steel cords showing through the rubber all mean the track is near the end of its life. A track in that state can fail without much warning, so plan the change before it does.

The tracks wear out early

If a set of tracks wears out well before the last set did, look at the parts underneath before you fit new ones. Material packing between sprocket teeth, rollers and the track also speeds up wear, so keep the undercarriage clean. Our guide to spotting a worn sprocket shows what to look for, and these five tips to extend rubber track life cover other common causes.

Operating habits that add wear

Spinning the tracks, unnecessary reversing, high travel speed when it is not needed and always turning in the same direction all add wear. They wear the tracks and the sprockets that drive them.

T550 idlers, rollers and sprockets to check at a track change

With the tracks off, the whole undercarriage is in plain view. That makes a track change the best time to inspect it. Here is what our catalog lists for the T550:

Part Listed as Undercarriage Weight each
Idler Front idler or rear idler Solid-mount Not listed
Bottom roller 8 per machine Not named on the listing 26.9 kg (59.3 lb)
Drive sprocket Not listed online: ask the team Ask the team Not listed

Source: Excavator Parts Direct catalog, November 2026. Kilogram weight converted from the catalog’s pound figure.

Front idler for the Bobcat T550, solid-mount undercarriage
Rear idler for the Bobcat T550, solid-mount undercarriage
Bottom roller for the Bobcat T550
Bobcat T550 undercarriage parts. Left: front idler. Center: rear idler (both solid-mount). Right: bottom roller.

Front and rear idlers

Idlers guide the track around each end of the track frame and work with the track adjuster to hold tension. Our T550 idler is listed as a front idler or a rear idler, for the solid-mount undercarriage, so check which position you need before you order. Look for worn running surfaces, damaged flanges and oil leaks. With an idler off, it is also the easiest time to check or replace the track adjuster.

Bottom rollers

Bottom rollers run along the underside of the track frame and carry the machine’s weight on the track. Our catalog lists 8 per T550. Look for flat spots, worn flanges, oil leaks and rollers that no longer turn, and check every one, including the rollers that are hard to see. We advise changing bottom rollers as a set, because a single new roller sits proud of the worn ones and wears faster. Our guide to track rollers explains each type.

Drive sprockets

The sprocket bolts to the final drive and its teeth engage the track to drive the machine. We do not currently list a T550 sprocket online. Sprocket wear is hard to judge by eye, so compare yours with an unused sprocket of the same type. Wear builds faster in reverse and at higher travel speeds. If yours are worn, contact us with the serial number and we will check what we can supply.

Our advice

If the idlers, rollers or sprockets show wear, replace them with the tracks. It is one job and one round of downtime, and the new tracks start on a sound undercarriage.

What we list for the Bobcat T550

These are the T550 parts in our catalog. The track and idler are on the Bobcat T550 parts page for the solid-mount undercarriage. The bottom roller is listed separately, without an undercarriage named.

TracksBobcat T550 rubber track400 x 86 x 49B. C-lug or Z-lug tread. Solid-mount. Sold per track.View part →IdlersBobcat T550 idlerFront idler or rear idler. Solid-mount. Heat-treated steel casing, sealed oil-filled shaft and bearings.View part →RollersBobcat T550 bottom rollerHeat-treated steel casing, heavy-duty seals. Our catalog lists 8 per machine.View part →

More Bobcat parts

FAQ

What size tracks does a Bobcat T550 take?+

Our catalog lists one track size for the Bobcat T550 with the solid-mount undercarriage: 400 x 86 x 49B. That is 400 mm (15.7 in) wide, with an 86 mm pitch and 49 links.

How wide are Bobcat T550 tracks?+

The T550 track in our catalog is 400 mm (15.7 in) wide.

What does 400 x 86 x 49B mean?+

It is the track size, written width x pitch x number of links. The track is 400 mm wide, has an 86 mm pitch and has 49 links.

Can I get a C-lug or Z-lug track for the Bobcat T550?+

Yes. Our catalog lists the 400 x 86 x 49B track for the T550 with a C-lug or a Z-lug tread. Tell us about the ground and the work, and we will help you choose.

Are Bobcat T550 tracks sold individually?+

Yes. We sell T550 tracks individually, and the price shown is for one track.

Do you list a front idler and a rear idler for the Bobcat T550?+

Yes. Our T550 idler listing has two options, front idler and rear idler, both for the solid-mount undercarriage. Choose the position you need, or contact us with the serial number if you are not sure.

How many bottom rollers does a Bobcat T550 have?+

Our catalog lists 8 bottom rollers per Bobcat T550. The bottom roller listing does not name an undercarriage, so send us the serial number if you want us to confirm the fit.

Do you list a Bobcat T550 sprocket?+

We do not currently list a T550 drive sprocket online. Contact us with the machine serial number and we will check what we can supply.

How do I know when my T550 tracks need replacing?+

Common signs are a track that will not hold tension, a track that slips or jumps on the sprocket, deep cuts or missing lugs, steel cords showing through the rubber, and tracks that wear out much faster than the last set. Check the sprockets, idlers, bottom rollers and track adjuster at the same time, because worn parts underneath shorten the life of new tracks.

Related guides

Need tracks or undercarriage parts for your T550?

Tell us your machine, its serial number and what you need. We will confirm the right parts and send a quote. Shipped across the USA.

Get a quoteTalk to the team

Bobcat and T550 are trademarks of their owner. The make and model names are used only to identify fitment. Excavator Parts Direct parts are aftermarket replacement parts, not genuine OEM parts, and Excavator Parts Direct is not affiliated with any manufacturer named.

Related news

11/11/2026

CAT 239D Tracks: Size, Fit and Undercarriage Parts

CAT 239D tracks are listed in two sizes, 320 x 86 x 49B and 400 x 86 x 49B: 320 mm (12.6 in) or 400 mm (15.7 in) wide, with an 86 mm pitch and 49 links, in C-lug or Z-lug tread. How to measure them, confirm the fit and check the sprockets and undercarriage.

Find out more

11/11/2026

John Deere 317G Tracks: Size, Fit and Undercarriage Parts

John Deere 317G tracks are listed in two sizes, 320 x 86 x 50B and 400 x 86 x 50B: 320 mm (12.6 in) or 400 mm (15.7 in) wide, with an 86 mm pitch and 50 links. How to measure them, confirm the fit and check the undercarriage parts around them.

Find out more

09/11/2026

Kubota SVL65-2 Tracks: Size, Fit and Undercarriage Parts

The Kubota SVL65-2 is listed with two track sizes, 320 x 86 x 52B and 400 x 86 x 52B (86 mm pitch, 52 links), in a C-lug or Z-lug tread, and the SVL65-2C track is listed at 400 x 86 x 52B. This guide covers how to confirm the fit, the signs of wear and the SVL65-2 sprockets and bottom rollers to check.

Find out more

Didn’t find what you need?

Contact our helpful sales team today.