19/11/2026

Bobcat E32 Tracks: Size, Fit and Undercarriage Parts

The Bobcat E32 is listed with one track size, 300 x 52.5 x 80N: 300 mm (11.8 in) wide, with a 52.5 mm pitch and 80 links. This guide covers how to confirm the fit, the signs of wear and the E32 undercarriage parts to check at a track change.

Bobcat E32 Tracks: Size, Fit and Undercarriage Parts

Bobcat E32 Tracks: Size, Fit and Undercarriage Parts

Machine guideBobcat E326 min read

Looking for Bobcat E32 tracks? Our catalog lists the Bobcat E32 with one track size. This guide gives the Bobcat E32 track size, how to measure and confirm the fit, the signs that tracks are worn, and the undercarriage parts worth checking while the tracks are off.

The short answer

  • The Bobcat E32 track is listed as 300 x 52.5 x 80N: 300 mm (11.8 in) wide, with a 52.5 mm pitch and 80 links.
  • Our catalog lists one track variant for the E32 and 2 tracks per machine. Tracks are sold per track.
  • At a track change, check the 2 top rollers, the idlers, the bottom rollers and the sprocket. We list the E32 top roller and idler online; for bottom rollers and the sprocket, contact us.

Bobcat E32 track size

Our catalog lists one track size for the Bobcat E32 rubber track. There is one listed variant, so the size below is the one to check against your machine.

Track size Width Pitch Links Per machine
300 x 52.5 x 80N 300 mm (11.8 in) 52.5 mm 80 2

Source: Excavator Parts Direct catalog, November 2026. Sold as a single track (price is per track).

Read the size as width x pitch x links. A 300 x 52.5 x 80N track is 300 mm wide, has 52.5 mm between link centers and has 80 links. The letter is part of the listed size code, so quote the full code, letter included, when you order. The link count matters as much as the width: a track with the right width and pitch but the wrong number of links will not tension correctly.

Bobcat E32 rubber track, size 300 x 52.5 x 80N
Bobcat E32 rubber track, 300 x 52.5 x 80N.

Bobcat E32, E32C or E32I?

Several versions of the E32 carry a letter after the model number. Our catalog gives each one its own track listing, so start with the model plate on the machine and order from the listing that matches it.

Model plate shows Where to look
E32 Rubber track for Bobcat E32 (300 x 52.5 x 80N, as above)
E32C Rubber track for Bobcat E32C
E32I Rubber track for Bobcat E32I
Something else Contact us with the model and serial number

Source: Excavator Parts Direct catalog, November 2026. Model names as listed in the catalog.

If the plate is missing or unreadable, the serial number is the next best guide. Send it to us with a photo of your current track and we will confirm the right listing before you order.

How to measure a Bobcat E32 track

If the size is still readable on the side of your old track, use it. If it has worn away, take three measurements:

1

Width

Measure across the track from edge to edge. A Bobcat E32 track should measure 300 mm (11.8 in).

2

Pitch

Measure from the center of one link to the center of the next. The E32 track has a 52.5 mm pitch. Measure over several links and divide, which gives a truer figure than a single gap.

3

Links

Count the drive lugs around the inside of the track. The E32 track has 80. Mark your starting lug with chalk so you do not count one twice.

If your numbers match the table, you have the right size. Our guide to measuring rubber tracks shows each step with diagrams, and our mini excavator tracks guide explains how to choose a replacement track.

Four checks before you order Bobcat E32 tracks

1

Confirm the make and model

Check the model plate on the machine. The E32, E32C and E32I each have their own listing. If the plate shows a different machine, order for that machine, or contact us with the machine details and serial number and we will check.

2

Match the size

Compare the size on the old track, or your measurements, with the table above. If the width is not 300 mm, the pitch is not 52.5 mm or the link count is not 80, stop and check before you order.

3

Check the tread

Our catalog lists one variant for the E32, and the listing does not name a tread pattern. If you want a particular tread, send us a photo of your current track and we will confirm what we can supply. Fit two tracks of the same tread so both sides grip and wear evenly.

4

Look underneath first

Before the new tracks go on, inspect the sprocket, idlers and rollers. New tracks on a worn undercarriage wear out sooner.

Our advice

A size that is checked, not guessed, is the quickest way back to work. If anything does not match, talk to the team before you order, so you maximize machine uptime and avoid a return.

Signs your Bobcat E32 tracks are worn

We recommend these checks on any tracked machine.

Damage to the rubber

Walk around the machine and look at the full length of each track. Deep cuts, missing lugs and steel cords showing through the rubber all mean the track is near the end of its life. A track in that state can fail without much warning.

Tension will not hold

If the track keeps going slack after you adjust it, do not assume the track is the cause. A track adjuster with failed piston seals cannot hold tension, and a worn sprocket can add to the problem. Here is how to check rubber track tension. The correct tension figure for the E32 is in your machine’s operator’s manual. Our guide to excavator track adjusters explains how the adjuster works.

The track slips or jumps on the sprocket

When sprocket teeth wear sharp, they stop holding the track cleanly. The track can slip or jump through the sprocket, and the shock load travels into the final drive. If you see or hear this happen, stop and inspect the sprocket before you carry on.

The tracks wear out early

If a set of tracks wears out well before the last set did, look at the parts underneath before you fit new ones. Material packing between the sprocket teeth, rollers and the track also speeds up wear, so keep the undercarriage clean. Our guide to spotting a worn sprocket shows what to look for, and these five tips to extend rubber track life cover other common causes.

Operating habits that add wear

Spinning the tracks, unnecessary reversing, high travel speed when it is not needed and always turning in the same direction all add wear. They wear the tracks and the sprocket that drives them.

Bobcat E32 undercarriage parts to check at a track change

With the tracks off, the whole undercarriage is in plain view. That makes a track change the best time to inspect it. Here is what our catalog shows for the E32:

Part Listed online What to check
Top roller Yes: 2 per machine, 5.5 lb (2.5 kg) each Turns freely, no oil leaks
Idler Yes: 2 per machine, 82 mm (3.2 in) side arm, 44.5 lb (20.2 kg) each Worn running surface, damaged flanges, oil leaks
Bottom rollers Not listed online: ask the team Flat spots, worn flanges, oil leaks, rollers that do not turn
Drive sprocket Not listed online: ask the team Teeth worn sharp, track slipping or jumping

Source: Excavator Parts Direct catalog, November 2026. Kilogram and inch figures converted from the catalog’s pound and millimeter figures.

Top roller (carrier roller) for the Bobcat E32
Bobcat E32 top roller.

Top rollers

Top rollers, also called carrier rollers, support the upper run of the track between the sprocket and the idler. Our catalog lists 2 E32 top rollers per machine. Check that each one turns freely and is not leaking oil. Our guide to bottom rollers and carrier rollers explains the difference.

Idler for the Bobcat E32 with 82 mm side arm
Bobcat E32 idler.

Idlers and the track adjuster

Idlers guide the track around the end of the track frame and work with the track adjuster to hold tension. Our catalog lists the E32 idler with an 82 mm side arm, 2 per machine. Measure the side arm on your old idler to confirm. Check for worn running surfaces, damaged flanges and oil leaks. With an idler off, it is also the easiest time to check or replace the track adjuster. Our guide to excavator idlers covers the signs of wear in more detail.

Bottom rollers

Bottom rollers run along the underside of the track frame and carry the machine’s weight on the track. We do not currently list E32 bottom rollers online. Look for flat spots, worn flanges, oil leaks and rollers that no longer turn, and check every one, including the rollers that are hard to see. We advise changing bottom rollers as a set, because a single new roller sits proud of the worn ones and wears faster.

Drive sprocket

The sprocket bolts to the final drive and its teeth engage the track to drive the machine. Its pitch must match the track, which on the E32 is 52.5 mm. We do not currently list an E32 sprocket online. Sprocket wear is hard to judge by eye, so compare yours with an unused sprocket of the same type. Wear builds faster in reverse and at higher travel speeds. If yours is worn, send us the serial number and we will check what we can supply. Our guide to excavator undercarriage parts covers each part in more detail.

Our advice

If the sprocket, idlers or rollers show wear, replace them with the tracks. It is one job and one round of downtime, and the new tracks start on a sound undercarriage. For parts we do not list online, speak to the team with your serial number.

What we list for the Bobcat E32

These are the E32 parts in our catalog. Each one has its own listing, and all three sit together on our Bobcat E32 parts page.

TracksBobcat E32 rubber track300 x 52.5 x 80N. Continuously wound steel carcass and high tensile steel cords. Sold per track.View part →RollersBobcat E32 top rollerHeat-treated steel casing, heavy-duty seals. Our catalog lists 2 per machine.View part →IdlersBobcat E32 idler82 mm side arm. Sealed oil-filled shaft and bearings. Our catalog lists 2 per machine.View part →

More Bobcat parts

FAQ

What size tracks does a Bobcat E32 take?+

Our catalog lists the Bobcat E32 track as 300 x 52.5 x 80N. It is 300 mm (11.8 in) wide, has a 52.5 mm pitch and has 80 links.

How wide is a Bobcat E32 track?+

The track our catalog lists for the Bobcat E32 is 300 mm (11.8 in) wide.

What does 300 x 52.5 x 80N mean?+

It is the track size, written width x pitch x number of links. The track is 300 mm wide, has a 52.5 mm pitch and has 80 links. The letter is part of the listed size code, so quote the full code when you order.

Are Bobcat E32 rubber tracks sold individually?+

Yes. We sell Bobcat E32 rubber tracks individually, and the price shown is for one track. Our catalog lists 2 tracks per machine.

Which track do I need if the model plate shows E32C or E32I?+

Order from the listing that matches your model plate. We list separate tracks for the Bobcat E32, E32C and E32I. If you are not sure which model you have, contact us with the serial number and we will check.

How many top rollers does a Bobcat E32 have?+

Our catalog lists 2 top rollers per machine for the Bobcat E32.

How tight should Bobcat E32 tracks be?+

Use the tension figure in your machine’s operator’s manual. A track that is too loose can come off, and a track that is too tight wears faster. If the track will not hold tension, check the track adjuster.

Do you list bottom rollers or a sprocket for the Bobcat E32?+

Not online at the moment. We list the E32 rubber track, top roller and idler. For E32 bottom rollers or a sprocket, contact us with the serial number and we will check what we can supply.

How do I know when my Bobcat E32 tracks need replacing?+

Common signs are deep cuts or exposed steel cords, a track that will not hold tension, a track that slips or jumps on the sprocket, and tracks that wear out much faster than the last set. Check the sprocket, idlers, rollers and track adjuster at the same time, because worn parts underneath shorten the life of new tracks.

Related guides

Need tracks or undercarriage parts for your Bobcat E32?

Tell us your machine, its serial number and what you need. We will confirm the right parts and send a quote. Shipped across the USA.

Get a quoteTalk to the team

Bobcat, E32, E32C and E32I are trademarks of their owner. The make and model names are used only to identify fitment. Excavator Parts Direct parts are aftermarket replacement parts, not genuine OEM parts, and Excavator Parts Direct is not affiliated with any manufacturer named.

Related news

19/11/2026

When to Replace Skid Steer Tracks: Signs of Wear and Track Life

How to tell when skid steer and compact track loader tracks need replacing: six signs of wear, a six-step track check, and what to inspect on the undercarriage before new tracks go on.

Find out more

19/11/2026

John Deere 50G Tracks: Size, Fit and Undercarriage Parts

The John Deere 50G is listed with one track size, 400 x 72.5 x 74N: 400 mm (15.7 in) wide, with a 72.5 mm pitch and 74 links. This guide covers how to confirm the fit, the signs of wear and the 50G sprocket, idler and rollers to check at a track change.

Find out more

19/11/2026

Bobcat E32 Tracks: Size, Fit and Undercarriage Parts

The Bobcat E32 is listed with one track size, 300 x 52.5 x 80N: 300 mm (11.8 in) wide, with a 52.5 mm pitch and 80 links. This guide covers how to confirm the fit, the signs of wear and the E32 undercarriage parts to check at a track change.

Find out more

Didn’t find what you need?

Contact our helpful sales team today.